Amped Wireless R20000G Setup Guide download pdf

Disconnect & Power Off your Existing Router

(If you have one)

Power Off your Modem

The Smart Setup Wizard will guide you

through the following settings:

Internet Connection Settings

System Clock

Wireless Settings

Click Start to begin.

Configure your Internet Connection

Automatically configure your Internet settings

by clicking on Automatic Configuration.

More advanced users may choose to

configure their connection manually by

selecting Manual Configuration.

If your Internet provider requires that you

need to do so under Manual Configuration.

If the Automatic Configuration was successful,

you will be directed to a Configuration

Successful page.

Click Next to continue.

Configure your Wireless and Security Settings

Set the System Clock

The System Clock is used for system logs

and setting schedules for Internet access.

Click Sync to synchronize the System Clock

with the time on your computer.

Click Next to continue.

If there is a problem with the Automatic

Configuration, the wizard will notify you of the

issue. If you continue to have problems, contact

our support department at 888-573-8820.

Welcome to the Smart Setup Wizard

Disconnect your existing router from your computer, your

broadband modem and its power outlet. If you do not have

an existing router please continue to Step 2.

Power off the modem by disconnecting the modem’s power

adapter from the power outlet. If your modem has a backup

battery, remove the backup battery from your modem.

Accessing the setup menu does not require Internet access. The menu is served from the Router.

NOTE: IF YOU HAVE PROBLEMS ACCESSING THE WEB MENU

Disable any third party firewalls that your computer may have on (e.g., Norton/ZoneAlarm/Windows Defender).

Check to see that your computer is NOT connected to any wireless networks.

IF YOU HAVE PROBLEMS ACCESSING THE WEB MENU...

Open your Web Browser

If the URL fails to open, then try: http://192.168.3.1

Enter the setup web address into your browser:

When prompted, enter the login and password:

http://setup.ampedwireless.com

PASSWORD: admin

Do NOT power on your modem until Step 4.

Power On the High Power Router and Connect it to your Computer

Attach the two included Antennas.

Connect the included grey Ethernet cable to

an available network port on your computer.

Attach the Power Adapter to the High Power

Router’s port and a power outlet.

PWR

Modem

Remove

Backup battery

Existing Router

Modem

Congratulations, the High Power Router is

now successfully configured, and your settings

are now saved. You may now connect additional

devices directly to the 4 wired ports on the

back panel, or connect wirelessly to the

High Power Router.

Setup Summary

The default ID of your 2.4GHz wireless network is:

Amped_2.4GHz

To change it, enter a new name in the SSID

field. Users connecting wirelessly to the Router

will use this ID to identify your 2.4GHz wireless

network.

The default Security Key (WPA/WPA2) of your

2.4GHz wireless network is: wireless

To change it, enter a new key in the Security Key

field. The key must be at least 8 characters long.

Click Next to apply your settings. The High

Power Router will reboot. This process may take

up to 1 minute. The page will automatically

reload after the countdown. If it does not, you

may need to refresh the page manually or check

your connection to the router.

2.4GHz Wireless Settings

The default ID of your 5.0GHz wireless network is:

Amped_5.0GHz

To change it, enter a new name in the SSID

field. Users connecting wirelessly to the Router

will use this ID to identify your 5.0GHz wireless

network.

The default Security Key (WPA/WPA2) of your

5.0GHz wireless network is: wireless

To change it, enter a new key in the Security Key

field. The key must be at least 8 characters long.

Click Next to apply your settings and continue

with the settings for your 2.4GHz network.

5.0GHz Wireless Settings

Modem

High Power Router

Connect the High Power Router to your Modem

Use the included blue Ethernet cable and

connect one end of the cable to your modem.

Connect the other end of the cable to the blue

port on the High Power Router.

Modem

Do NOT connect the power adapter

to the High Power Router at this time.

Power On your Modem

Plug in the power adapter and reinsert the backup battery

(if available) to power on the modem.

Allow a minute or two for the modem to initiate.

Modem

Reinsert

Backup battery

Need Help? Give us a call.

Phone: 888-573-8820

Email: [email protected]

Web: www.ampedwireless.com/support

If you have any problems during the installation process, please contact Amped Wireless Elite Support for further assistance.

— R E A D F I R S T —

SETUP GUIDE

High Power Wireless-N 600mW Gigabit Dual Band Router

Need Help? Give us a call.

Phone: 888-573-8820

Email: [email protected]

Web: www.ampedwireless.com/support

R20000G

v032012

1 2

Summary of Contents

Page 1 - — R E A D F I R S T —

12Disconnect & Power Off your Existing Router (If you have one)Power Off your ModemThe Smart Setup Wizard will guide you through the following se

Page 2 - Windows 7 and Vista

Troubleshooting Tips I entered setup.ampedwireless.com and it failed to open the Web Menu.a. Make sure your computer is connected to the High Power R

Amped Wireless R20000G Setup Guide

Browse online or download Setup Guide for Routers Amped Wireless R20000G. Amped Wireless R20000G Setup guide User Manual

Summary of Contents

More documents for Routers Amped Wireless R20000G

Comments to this Manuals

Amped Wireless R20000G Setup Guide

Browse online or download Setup Guide for Routers Amped Wireless R20000G. Amped Wireless R20000G Setup guide User Manual

Summary of Contents

More documents for Routers Amped Wireless R20000G

Comments to this Manuals

Related products and manuals for Routers Amped Wireless R20000G